Universal Dry Fix Ridge Kit
TIL-R Universal Dry Fix Ridge Kits are high quality, great value, mechanically fixed solutions which are suitable for most ridge and hip applications. (Additional components may be required for hips). Our Ridge Kits secure ridge tiles at the roof apex, are resistant to wind uplift and water penetration and are ventilated to BS 5534:2014 and BS 8612:2018 requirements.
- Conforms with BS5250
- Products suitable for high and low profile
- Design resistances available upon request
TIL-R Universal Dry Fix Ridge Kit contains;
- 6m x Ridge Roll
- 10 x Ridge Batten Brackets
- 13 x Ridge Unions (polyethylene) with 39 Union Clips (polyamide)
- 13 100mm Stainless Steel Screws
- 13 x Stainless Steel Clamping Plates
- 13 x A2 Stainless Steel & EPDM Sealing Washers
Product Kits (Sold separately)
Typical Applications
Suitable for most hip and ridge applications
Suitable for high and low profile
Advantages
Resistant to wind uplift and water penetration
Quick and easy to fit
Mechanically fixed solution
No specialist tools required
6m length
Limitations
Installation must be done in dry weather
Product Specifications
TIL-R Universal Dry Fix Ridge Kit Extension Packs
Contains:
- 7 x Ridge Batten Brackets
- 7 x Ridge Unions (polyethylene) with 21 Union Clips
(polyamide) - 7 x 100mm Stainless Steel Screws
- 7 x Stainless Steel Clamping Plates
- 7 x A2 Stainless Steel & EPDM Sealing Washers
TIL-R Rollable Ridge Vent
Material
Vapour permeable technical fabric with a corrugated aluminium strip down each edge, with a 2cm butyl strip attached to the underside. Aluminium and technical fabric glued and sewn together with threads resistant to environmental factors. Polyester lacquer coating – 15-25 µm
- Colour: Black RAL 9005
- Dimensions: Width: 310mm Length: 6m
TIL-R Ridge Union (polyethylene)
- Dimensions: Thickness: 1.5mm
- Material: Polyethylene
TIL-R Ridge Union Clip (polyamide)
- Dimensions: Length 31.7cm
- Material: Polyethylene
TIL-R Ridge Batten Bracket
- Thickness: 1.5mm
- Material: Perforated steel strip
- Zinc Coating: 10 um
- Bracket Spacing: 50mm
TIL-R Screw
- Dimensions: Length: 100mm
- Material: Stainless Steel
TIL-R Clamping Plate
- Thickness: 1mm
- Width: 24mm
- Length: 50mm
- Material: Stainless
Sealing Washer
- Outside diameter: 12mm
- Inside diameter: 5.3mm
- Material: A2 Stainless Steel and Grey EPDM Sealer
