ALM 0PC0220 Fixing Clips TC Stainless Steel 600mm
- Available in Packs of 10
- Available in Copper or Stainless Steel
Description
Lead sheet and flashings are an important part of a durable and watertight roof. These must be held in place correctly. Clips should not be less than 50mm wide.
In sheltered conditions, copper and stainless-steel clips may be fixed at a maximum spacing of 500mm for each lap of lead sheet.
Clips should be spaced more closely in exposed situations.
Clip strength increases the closer the clip is fixed to the edge of lead sheet or flashing however, fixing near the base of the clip is not recommended for lower pitched roofs due to the risk of water penetration through the fixing hole.
An expansion fap of at least 6MM should be left between the edge of the lead sheet and the clip to allow for thermal movement.
Positions of fixings, particularly intermediate fixings should be chosen carefully to ensure that the thermal movement of the lead sheet is not impeded.
The nylite washer included in the Cast Lead Dome set is specifically for use with lead-clad steel and can be omitted when fixing lead sheet.
Features
- Available in Packs of 10
- Available in Copper or Stainless Steel
More Information
| SKU | 10236256 |
|---|---|
| Colour | Grey/Silver |
| Length | 600mm |
| Material | Fastenings |
| Dimensions | 0.04mm x 50mm x 600mm |
| Weight | 0.09kg |
| Width | 50mm |
| Height / Thickness | 0.04mm |
| Product Family | Lead and Ancillary Items |
| Product Range | Lead and Ancillary Items |
Downloads